Super Duplex UNS S32750 Buttweld Fittings have higher chromium, nickel, and molybdenum content than standard austenitic stainless steel alloys. This property makes SDSS UNS S32750 buttweld pipe fittings far better suited for applications requiring superior mechanical properties and improved corrosion resistance. The addition of nitrogen also helps to enhance these benefits even further, giving these fittings excellent temperature tolerance. Investing in these fittings will pay off in the long run, as they are built to last.
Table of Content
What are Super Duplex UNS S32750 Buttweld Fittings?
Super Duplex UNS S32750 Buttweld Fittings are constructed from Super Duplex stainless steel, also known as UNS S32750. These fittings are best suited for applications exposed to highly aggressive environments and employed in industries such as oil and gas, chemical processing, and seawater. UNS S32750 super duplex pipe fittings offer remarkable corrosion resistance twice that of conventional austenitic stainless steel grades, such as 304 and 316L. In addition, these Buttweld Fittings have higher strength than regular austenitic grades. This combination makes Super Duplex UNS S32750 an ideal material for various applications with excellent long-term reliability.
What are the properties of Super Duplex UNS S32750 Buttweld Fittings?
Super Duplex UNS S32750 Buttweld Fittings are stylish for their exceptional corrosion resistance, strength and high yields. Super duplex stainless steel UNS S32750 pipe fittings offer a 50% greater tensile strength than most standard duplex stainless steel. Super Duplex is an austenitic-ferritic alloy with a PREN (pitting resistance equivalent) ranging from 35-45 in seawater environments, making it hugely beneficial for marine applications. In addition, Super Duplex UNS S32750 Buttweld Fittings also resist chloride pitting, crevice corrosion and stress scaling & cracking. Super Duplex is often used in paper and chemical processing industries where sulfuric acid is present. Super Duplex's reliable performance and unique properties make it a popular choice for many applications worldwide.
What are the applications of Super Duplex UNS S32750 Buttweld Fittings?
Super Duplex UNS S32750 Buttweld Fittings are used in various industries, most notably in the oil and gas, chemical processing, and shipbuilding industries. These fittings are the best choice for use in highly acidic environments or to connect pipes in high-pressure areas because of their better corrosion resistance and strength. As a result, they are perfect for use in applications that require very high temperatures or pressures. With the wide range of benefits offered by Super Duplex UNS S32750 Buttweld Fittings, it is no wonder they have become so popular in various industries worldwide. They provide superior performance and durability for any application where the highest standards are required.
Palgotta Metal Pvt Ltd. is India's leading manufacturer of high-quality steel products. All their products are made using the best materials available and are designed to stand up to the most demanding environments. The company also employs the latest technology in manufacturing processes and ensures that each product meets stringent industry standards. As well as offering its line of products, We also provides customized solutions tailored to meet customer requirements.
STANDARD | WERKSTOFF NR. | UNS / Grade |
ASTM A815 / ASME SA815 | 1.4410 | S32750 (F53) |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
S32750 | 7.8 | 0.281 | 1350 | 2460 |
ASME b16.9 Fittings Normal Pipe Size |
ANSI b16 9 Pipe Fitting O D Y |
Wall Thickness
T (Pipe Elbow Sch.) |
LR 45 Deg Elbows Centre to Face B | SR 45 Deg Elbows Weight |
LR 90 Deg Elbows Centre to Face A | LR 90 Deg Elbows Weight In Below | SR 90 Deg Elbows Centre to Face A | SR 90 Deg Elbows Weight In Below | ||
millimeter | inch. | millimeter | millimeter | Schedule | millimeter | kilogram | millimeter | kilogram | millimeter | kilogram |
15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.04 | 38.1 | 0.08 | – | – |
3.73 | X.S | 15.9 | 0.05 | 38.1 | 0.10 | – | – | |||
20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.04 | 28.6 | 0.08 | – | – |
3.91 | X.S | 11.1 | 0.05 | 28.6 | 0.11 | – | – | |||
25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.09 | 38.1 | 0.15 | 25.4 | 0.11 |
4.55 | X.S | 22.2 | 0.11 | 38.1 | 0.19 | 25.4 | 0.14 | |||
32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.14 | 47.6 | 0.28 | 31.75 | 0.18 |
4.85 | X.S | 25.4 | 0.2 | 47.6 | 0.39 | 31.75 | 0.24 | |||
40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.2 | 57.1 | 0.4 | 38.1 | 0.26 |
5.08 | X.S | 28.6 | 0.25 | 57.1 | 0.5 | 38.1 | 0.35 | |||
50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.36 | 76.2 | 0.72 | 50.8 | 0.5 |
5.54 | X.S | 34.9 | 0.5 | 76.2 | 1.0 | 50.8 | 0.68 | |||
65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 0.73 | 95.2 | 1.46 | 63.5 | 0.95 |
7.01 | X.S | 44.4 | 0.91 | 95.2 | 1.82 | 63.5 | 1.27 | |||
80 | 3” | 88.9 | 5.49 | STD | 50.8 | 1.1 | 114.3 | 2.18 | 76.2 | 1.45 |
7.62 | X.S | 50.8 | 1.45 | 114.3 | 2.86 | 76.2 | 1.95 | |||
100 | 4” | 114.3 | 6.02 | STD | 63.5 | 2.1 | 152.4 | 4.2 | 101.6 | 2.8 |
8.56 | X.S | 63.5 | 2.9 | 152.4 | 5.7 | 101.6 | 3.9 | |||
125 | 5” | 141.3 | 6.65 | STD | 79.4 | 3.4 | 190.0 | 6.8 | 127.0 | 4.8 |
9.5 | X.S | 79.4 | 5.0 | 190.0 | 10.0 | 127.0 | 6.5 | |||
150 | 6” | 168.3 | 7.11 | STD | 95.2 | 5.1 | 229.0 | 10.1 | 152.4 | 6.8 |
10.97 | X.S | 95.2 | 7.7 | 229.0 | 15.3 | 152.4 | 10.2 | |||
200 | 8” | 219.1 | 8.18 | STD | 127.0 | 10.2 | 305.0 | 20.4 | 203.0 | 13.6 |
12.7 | X.S | 127.0 | 15.5 | 305.0 | 30.9 | 203.0 | 20.9 | |||
250 | 10” | 273.9 | 9.27 | STD | 159.0 | 18.1 | 381.0 | 36.1 | 254.0 | 24.1 |
12.7 | X.S | 159.0 | 24.4 | 381.0 | 48.8 | 254.0 | 32.5 | |||
300 | 12” | 323.9 | 9.52 | STD | 190.0 | 26.6 | 457.0 | 53.1 | 305.0 | 35.4 |
12.7 | X.S | 190.0 | 35.0 | 457.0 | 70.0 | 305.0 | 46.7 | |||
350 | 14” | 355.6 | 9.52 | STD | 222.0 | 34.1 | 533.0 | 68.1 | 356.0 | 45.4 |
12.7 | X.S | 222.0 | 45.0 | 533.0 | 90.0 | 356.0 | 60.0 | |||
400 | 16” | 406.4 | 9.52 | STD | 254.0 | 45.0 | 610.0 | 89.3 | 406.0 | 59.5 |
12.7 | X.S | 254.0 | 59.0 | 610.0 | 118.0 | 406.0 | 78.7 | |||
450 | 18” | 457.0 | 9.52 | STD | 286.0 | 56.5 | 686.0 | 113.0 | 457.0 | 75.6 |
12.7 | X.S | 286.0 | 75.0 | 686.0 | 150.0 | 457.0 | 100.0 | |||
500 | 20” | 508.0 | 9.52 | STD | 318.0 | 85.0 | 762.0 | 140.0 | 508.0 | 93.5 |
12.7 | X.S | 318.0 | 112.5 | 762.0 | 186.0 | 508.0 | 124.0 | |||
600 | 24” | 610.00 | 9.52 | STD | 381.0 | 101.5 | 914.0 | 203.0 | 610.0 | 135.0 |
12.7 | X.S | 381.0 | 134.5 | 914.0 | 269.0 | 610.0 | 179.0 |
BW Fittings ANSI B16.9 Tolerance (45 And 90 degree) Elbow, End Cap, Tee, Reducer) | 90 Deg. & 45 Deg. Elbow and Tee |
Reducer & Long Lap Joint Stub End |
Cap | |||
Fitting Dimension (NPS) | Outside Daimeter Diameter at Bevel |
Inside Diameter at End |
Wall Thick T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal Thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
-0.03 | ||||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.12 | ||||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.19 | ||||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
-0.19 | ||||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
-0.19 |
NPS (Normal Pipe Size) | O.D. (Outside Diameter) | Ave. I.D. (Inside Diameter) |
Mani. WALL |
Normal Weight |
Maxi. W.P. psi |
1/4" | .540 | .282 | .119 | .105 | 1130 |
3/8" | .675 | .403 | .126 | .146 | 920 |
1/2" | .840 | .526 | .147 | .213 | 850 |
3/4" | 1.050 | .722 | .154 | .289 | 690 |
1" | 1.315 | .936 | .179 | .424 | 630 |
1-1/4" | 1.660 | 1.255 | .191 | .586 | 520 |
1-1/2" | 1.900 | 1.476 | .200 | .711 | 470 |
2" | 2.375 | 1.913 | .218 | .984 | 400 |
2-1/2" | 2.875 | 2.290 | .276 | 1.500 | 420 |
3" | 3.500 | 2.864 | .300 | 2.010 | 370 |
3-1/2" | 4.000 | 3.326 | .318 | 2.452 | 350 |
4" | 4.500 | 3.786 | .337 | 2.938 | 320 |
5" | 5.563 | 4.768 | .375 | 4.078 | 290 |
6" | 6.625 | 5.709 | .432 | 5.610 | 280 |
8" | 8.625 | 7.565 | .500 | 8.522 | 250 |
10" | 10.750 | 9.493 | .593 | 12.635 | 230 |
12" | 12.750 | 11.294 | .687 | 17.384 | 230 |
14" | 14.000 | 12.410 | .750 | 20.852 | 220 |
16" | 16.000 | 14.213 | .843 | 26.810 | 220 |
18" | 18.000 | 16.014 | .937 | 33.544 | 220 |
20" | 20.000 | 17.814 | 1.031 | 41.047 | 220 |
24" | 24.000 | 21.418 | 1.218 | 58.233 | 210 |
ASME B16.9 Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Tees, Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
MSS SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Pressure-Temperature ratings for ASME B16.9 Buttweld fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Super Duplex Steel F53 Buttweld Fittings Latest Price | Super Duplex Steel F53 Seamless Pipe Fittings Stockists | Super Duplex Stainless Steel S32750 Pipe Fittings Exporters | Super Duplex Steel S32750 Butt weld Fittings | Super Duplex S32750 Fittings Manufacturers | Supplier of Super Duplex Steel EN 1.4410 Pipe Fittings | Super Duplex Steel S32750 Buttweld Pipe Fittings Suppliers.
Czech Republic, Oman, Romania, United Kingdom, Libya, Bahrain, Ukraine, Israel, columbia, India, Belgium, Hungary, Bangladesh, Malaysia, Trinidad & Tobago, Canada, Venezuela, Puerto Rico, Vietnam, Macau, Bulgaria, Gabon, Serbia, Thailand, Qatar, Nepal, Algeria, Denmark, Turkey, Tunisia, Lahore, Estonia, Netherlands, Namibia, Spain, New Zealand, Bolivia, Saudi Arabia, Bhutan, Hong Kong, Kenya, Finland, Angola, Brazil, Philippines, South Korea, Gambia, Greece, Sweden, Sri Lanka, Lithuania, Portugal, Slovakia, Jordan, Poland, Mongolia, Lebanon, United States, Belarus, Iran, Singapore, Italy, Kuwait, Egypt, Japan, Tibet, Iraq, Austria, Croatia, Costa Rica, Colombia, Ecuador, Afghanistan, Russia, Pakistan, Nigeria, Ireland, United Arab Emirates, Yemen, Zimbabwe, Morocco, Kazakhstan, France, Australia, Chile, Ghana, Mexico, China, Germany, Algiera, Azerbaijan, Switzerland, South Africa, Argentina, Norway, Peru, Taiwan, Indonesia.
Gurgaon, Navi Mumbai, Faridabad, Kanpur, Pune, Thane, Ranchi, Jamshedpur, Kolkata, Rajkot, Bhopal, Secunderabad, Surat, Ernakulam, Jaipur, Noida, Thiruvananthapuram, Nagpur, Pimpri-Chinchwad, Nashik, Ahmedabad, Hyderabad, Howrah, Ludhiana, Chennai, New Delhi, Haryana, Bengaluru, Visakhapatnam, mumbai, Indore, Chandigarh.